Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
111.7mm OD x 77mm ID
Complete Ducati type alternator
300W output. Connector may be block connector or female bullet connectors. See ELA10006 for male bullet connectors. Rotor may not be included
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
37712405 GU37712405 37 71 24 05
3771 2405 3771.2405 37.71.24.05
Prices from
£60.00 - £95.00
inc VAT dependent on condition
Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
Sorry, this part is no longer available.
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
Prices from
£60.00 - £95.00
inc VAT dependent on condition
Dimensions:
88mm ID
Nicasil coated square barrel for 1000cc engine
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
4 in stock, request a quote
29060200 GU29060200 29 06 02 00
2906 0200 2906.0200 29.06.02.00
Prices from
£50.00 - £120.00
inc VAT dependent on condition
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle).
This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
See BRA33204 for brake pads
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
Prices from
£60.00 - £120.00
inc VAT dependent on condition
Sump pan
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
Sorry, this part is no longer available.
14003500 GU14003500 14 00 35 00
1400 3500 1400.3500 14.00.35.00
Prices from
£72.00 - £120.00
inc VAT dependent on condition
Brembo P08 / F08 ( P8 ) right hand (if mounted behind fork leg) single bleed (M10 bleed nipple) brake caliper. Also used as rear caliper if mounted in underslung position
Coated aluminium pistons
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
14 in stock, request a quote
28652201 GU28652201 28 65 22 01
2865 2201 2865.2201 28.65.22.01
Prices from
£30.00 - £125.00
inc VAT dependent on condition
Brembo P08 / F08 ( P8 ) left hand (if mounted behind fork leg) or rear (mounted above and behind wheel spindle) single bleed (M10 bleed nipple) brake caliper
Coated aluminium pistons
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
28653001 GU28653001 28 65 30 01
2865 3001 2865.3001 28.65.30.01
Prices from
£60.00 - £125.00
inc VAT dependent on condition
Crankshaft
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
Sorry, this part is no longer available.
18064204 GU18064204 18 06 42 04
1806 4204 1806.4204 18.06.42.04
Prices from
£60.00 - £150.00
inc VAT dependent on condition
Reconditioned starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. See ELA14738 for replacement solenoid.
This may fit Loop frame models with 5 speed gearboxes, you will need to trim a clearance into the battery tray to make room. The clutch cable bracket will prevent fitment on 4 speed models.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
4 in stock
14730554 GU14730554 14 73 05 54
1473 0554 1473.0554 14.73.05.54
£155.00
INC VAT
£129.17 EX VAT
Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address.
NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts.
Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£155.00
INC VAT
£129.17 EX VAT
We are currently working on cataloguing and listing all our used stock for this web site however with tens of thousands of used spares it's taking some time!
In the meantime if you can't see what you are looking for please call us on 01484 841395 or fill in the used spares enquiry form for used spares enquiries.
Secure online shopping 
